Month: February 2018

  • New bits for “old” computers [6]

    The HDD bracket for serverpc arrived today so that is the opportunity to finish off this computer and bolt it to its shelf, all now complete. It was annoying that the expensive heavy brackets I bought from Mitre10 turn out not to be bent at a right angle, with the shelf drooping down more than…

  • New bits for “old” computers [5]

    So serverpc is now complete with RAM and excluding the HDD bracket which should come on Monday. It proves to be quite capable of running 12 GB VMs for different versions of Qgis so that part of it looks OK. I have it installed with Debian 9.3 and not much more than Virtualbox at the…

  • New bits for “old” computers [4]

    So I finished putting together the server last night, and then installed it. The motherboard SATA ports caused me enough concern to stop the assembly, and spend a little bit of time putting hot melt glue around them to reinforce them. Obviously this sort of activity will void your warranty, but since the board is…

  • New bits for “old” computers [3]

    So since writing last my main achievement has been to complete the Windows 10 PC, and put it in its little corner, along with building the sliding shelf for the scanner to sit on directly above. This means I now have what I needed the most, a scanner that is much easier to access because…

  • New bits for “old” computers [2]

    The next step in redoing things with computers 3 and 4 has been to strip out the Inwin mini tower chassis and put the mini ITX board (GA-E350) into it for the Windows computer. When I switched the disks over, with the same type of board as the Antec chassis, Windows didn’t notice any hardware…

  • New bits for “old” computers

    As of today the new SSD for the bedroom PC (NUC) and the one for the “server” have arrived. The NUC has now got the SSD installed and Xubuntu 18.04 (Bionic) installed on it and the video clips now being downloaded over the wireless from the mediapc. The difference in sound level is quite notable…

  • Linux “server”

    So linux PC #3 at my desk is going to become a server of sorts. Backup server for borg is one of the key roles it can do. Another one is Virtualbox server or PC running vboxes natively, depending on how I set it up. Another way of working around disk space limitations on MainPC…

  • Linux backup solutions

    So since I started to use Linux I have used rsync as a backup system. This has some limitations, and this week I decided to see if there is an actual backup solution. Well it turns out there are a number of FOSS backup packages to choose from. As usual the Gnome one (sbackup) isn’t…